is recommended for going around a fish or some other obstruction encountered during the drilling operation. Depending on the nature of the fish, equipment for this departure can be configured for use with traditional tie-in type devices or inflatable packers/anchors. The Trackmaster Plus Open Hole System is also ideal for drilling TAML Level 1 open hole sidetracks. If using tie-in devices, the system can require multiple trips; one to engage the anchor and one or more to sidetrack and continue drilling. Tie-In Systems are deployed on a specially designed shear sub that can transmit sufficient torque or fluid volumes to effectively anchor and orient the system. If using an inflatable packer/anchor, a one-trip system can be employed. In either case, orientation of the whipstock face can be achieved by using the hydraulic swivel.

• Enables orientation of the whipstock after the anchor is set
• Use when running a Tie-In Anchor
• Hydraulically actuated in increments as small as 11.25 degrees

• Simple three degree ramp design
• Bored to accept a cementing stinger
• Tail pipe is cemented into place to anchor deflector

• Simple three degree ramp design

• Hydraulically actuated

• Utilizes a spear, overshot or tap to latch to a tubular fish
• Fish becomes the anchor
• Run with hydraulic swivel to enable orientation